DELLA & DELLE | BROW HENNA | Black 3 grams

Follow the safety instructions in the instructions for use. Always perform the skin sensitivity test before using the product.

Mix the Della & Delle brow henna by slowly adding water.

to blend

According to the instructions: 1 part henna to four parts water. Use the small side of the measuring spoon to measure the brow henna, 1 spoon. Then use the larger side of the measuring spoon to measure water, 4 spoons. Our experience is that you will have too much henna left over, we recommend the following ratio: 1/2 part henna to 2 parts water. Use the small side of the measuring spoon to measure the brow henna, then use the larger side of the measuring spoon to measure water.

Mix until you get a creamy, homogeneous and lump-free paste. Add some water little by little if the mix is ​​too thick.

For a better effect, let the brow henna rest for 5-10 minutes before applying it to the skin.

In the meantime, clean the eyebrows thoroughly to remove excess oil from the skin and makeup residue.

Apply the brow henna to the eyebrow using a thin brush.

Allow to dry normally, at least 15 to 20 minutes.

Remove with a cotton ball moistened with water.

Hydroxypropyl Starch Phosphate, Sodium Carbonate, Lawsonia Inermis Extract (Henna), Cellulose Gum, Sodium Carbonate Peroxide, Sodium Chloride, Tetrasodium EDTA, P-Phenylenediamine Sulfate (CI 76060), Sodium Sulfate, Indigofera Tinctoria Leaf Powder, Cassia Italica Leaf Powder, Talc, Hydroxythylcellulose, Emblica Officinalis Fruit Powder ( Amla), sodium lauryl sulfate, sodium silicate, magnesium stearate, 4-chlororesorcinol, P-aminophenol sulfate (CI 76550)