BROWXENNA | MonoStep Lamination - Formula for express lamination of brows & lashes

Instructions for Eyebrows:

Preparation:

1. Cleanse the eyebrows using BrowXenna Shampoo-foam for deep cleansing. Rinse the Shampoo thoroughly with water.
2. Dry the eyebrows.

Application of composition:

1. Apply MonoStep BrowXenna® evenly on the eyebrows using a synthetic brush or applicator stick.
2. Distribute the product evenly, giving the hairs the desired direction. It's important not to change the eyebrow growth direction more than 45 degrees from natural.
3. After the exposure time, remove the product with a damp cotton pad in the direction of hair growth.

Exposure Time::

1. For thick, coarse, rough, and gray hair: 9-10 minutes. For very coarse hair - up to 12 minutes.
2. For medium-thickness hair: 7-8 minutes.
3. For porous, thin hair previously chemically treated: 3-6 minutes.
4. Lamination is not recommended on severely damaged and recently lightened eyebrows; instead, deep care with P Plex Recovery is recommended.

Eyebrow tinting:

1. Mix 2.7% Oxygen J2 Cream Activator or 1.8% Oxygen J2 Cream Activator with Oxygen J2 Dye for eyebrows and eyelashes at a 1:1 ratio. To avoid darkening the hair, use Oxygen J2 Cream Diluter.
2. Exposure time: 7 minutes.
3. Remove the dye with a damp cotton pad.
4. Dry the eyebrows.

Care and Recovery:

1. Apply a few drops of BrowXenna® P Plex Recovery, distribute evenly over the eyebrow hairs.
2. Do not rinse off the product for 24 hours.

Home Care Recommendations:

• Use BrowXenna® SPA Mask or BrowXenna® P Plex Recovery 2 times a week.
• Use BrowXenna® BOTEX-X or BrowXenna® BOTEX-X concentrate with ceramides.

Instructions for Eyelashes:

Preparation:

1. Cleanse the eyelashes using BrowXenna Shampoo-foam for deep cleansing. Rinse the Shampoo thoroughly with water.
2. Fix a silicone lash lift pads of the required size on the upper eyelid.
3. Carefully distribute and fix the eyelashes on the pads, following the rules of placement.
4. If you're using gel-type glue increase the exposure time by 2-3 minutes.

Curl Formation:

1. Apply BrowXenna® MonoStep to the area of the lash curl formation.
2. With even movements, apply a small amount of MonoStep to 2/3 of the lash length, stepping back 1-2 mm from the roots and leaving the tips free.
3. After the exposure time remove the product from the eyelashes with a damp cotton swab.

Exposure Time:

For thick and coarse eyelashes:

• 10-13 minutes

For medium-thickness, natural, and shiny eyelashes:

• 8-9 minutes

For thin, porous eyelashes previously chemically treated

• 5 minutes

Eyelash Tinting

1. Mix Oxygen J2 Cream-Activator 2.7% or Oxygen J2 Cream-Activator 1.8% with Oxygen J2 Dye for eyebrows and eyelashes in a 1:1 ratio.
2. Apply the resulting dyeing mixture to the eyelashes.
3. Exposure time: 7 minutes.
4. Remove the dye with a cotton swab.

Care and Recovery:

1. Apply a few drops of BrowXenna® P Plex Recovery distribute evenly over the eyelashes.
2. Do not rinse off the product for 24 hours.

Home Care Recommendations:

1. To prevent mechanical disruption of the eyelash curl shape, it is recommended to sleep on your back for the first day.
2. Use BrowXenna® P Plex Recovery,BrowXenna® BOTEX-X, or BOTEX-X concentrate with ceramides 2-3 times a week.

Contraindications:

• Individual intolerance to the product's components.
• Open wounds and skin damage.
• Pregnancy and breastfeeding.
• Chronic skin conditions.